|
Easily connect a 3½" hard drive to your computers USB 2.0 port!
- Supports up to 250GByte hard drives
- Hot-swappable connection
- External interface: USB 2.0 (Type B Female)
- Internal interface: ATA (40 Way IDC Female)
- USB 2.0 interface is also backward compatible with USB 1.1.
- Stylish transparent plastic housing with silver internal coating
- Integrated low noise fan
- On/Off switch
- Silicon rubber feet protect against sliding, shock and vibration, and allow housings to be stacked one above the other
- Internal soft rubber shock absorbers provide optimum protection for the drive
- Transparent USB 2.0 cable included (Type A USB Male to Type B USB Male), 1m
- External 30W power adaptor and mains cable included
- Chipset: ALI M5621-0223-E
- Supports 3½" drives with a maximum depth of 16cm
- Dimensions: 128 x 213 x 38mm (WxDxH)
- Compatible with Windows 98/ME/2000/XP and OS 9.0 to 9.2 & 10 (Mac OS 10.1 or later required for USB 2.0 support)
Please click here for a guide on how to install a hard drive.
To use USB housings under DOS please refer to http://www.bootdisk.com/usb.htm
Please note that LINDY is not responsible for any software and information from this link and does not support this software.
|