LINDY Computer Connection Technology
  Privacy Policy
 
 Password ? Have you forgotten you password?
HDMI / DVI Switches & Splitters
DVI Switch Remote, 4 Port

Digital video switch with remote control!

The DVI Switch Remote allows the video output of up to 4 DVI, HDMI or VGA devices to be connected to a DVI equipped TV, projector or TFT monitor. With support for display resolutions of up to 1080p, it’s ideal for use with high definition equipment in a home cinema installation. Switching between devices is achieved using the supplied IR remote control or the front panel button.

  • 4 Port remote control DVI video switch
  • Allows up to 4 DVI or HDMI equipped devices, such as DVD players, set top boxes, computers etc., to be connected to a single DVI display or projector
  • Also supports VGA analogue signals, see below for more information
  • Pass-through support for HDCP signals
  • Includes remote control with 4 user selectable IR codes to avoid conflicts with other devices

Click here to see our range of DVI and HDMI cables
more 


   Back


 Part No. 32591

Features & Specifications

  • Supports HDTV resolutions of up to 1080p
  • Supports DVI-D Single Link resolutions of up to 1900 x 1200 and VGA analogue resolutions of up to 2048 x 1536
  • Allows HDCP signals to be ‘passed through’ from the source device to the display
  • Silver finish to complement your existing home cinema equipment
  • Maximum cable length from device to switch box: 2m
  • Robust metal construction
  • Connectors: 5 x DVI-I Female (1 output, 4 input)
  • Supplied with Infra-red remote control and battery (CR2025)
  • 9V DC, 500mA power supply included
  • Operation Temperature: 0~40°C
  • Storage Temperature: -20°C ~ 60°C
  • Weight: 1.1kg
  • Dimensions: 245 x 170 x 50mm (WxDxH)

Connecting HDMI equipped devices

If your devices are equipped with an HDMI connector you can use DVI to HDMI cables or adapters. Please be aware however, that the DVI interface supports display signals only. Therefore, you will need to make separate audio connections from your source to your display/amplifier etc. Click here to see our DVI, HDMI and audio connection cables. For HDMI and DVI adapters, click here.

Connecting mixed VGA and DVI equipped devices

VGA analogue sources are also supported when used with the correct adapters. However, be aware that the the DVI Switch Remote does not convert analogue to digital signals or vice versa. This means that your display must be equipped with either a VGA input or analogue supporting DVI-I input. For best results, the monitor should also auto switch between active and inactive digital and analogue inputs. 

Please note: To connect analogue VGA devices, your display must feature either a 15 Way VGA or a DVI-I (Analogue and digital) input.

When connecting VGA analogue devices, you must use a combination of DVI-I cables and VGA adapters to make the connection from both the device and the display to the DVI Switch Remote. This is because DVI-D cables do not support analogue signals.

Examples:

1. To connect a PC equipped with a VGA output to the DVI IN port on the DVI Switch Remote, you can use either a 2m VGA TO DVI Adapter Cable (LINDY No. 41206, UK only) or a DVI Analogue to VGA Adapter Cable (LINDY No. 41222) and a 15 Way Male to Male S-VGA Cable.

2. To connect the DVI Switch Remote to a display, to enable analogue VGA support, you will need a DVI-I Cable or a DVI-I to DVI-D + VGA Splitter Cable (LINDY No. 41219) if connecting to a display with a separate VGA input.

  

To Top Top