|
Easily connect a 2½" ATA hard drive to your computers USB 2.0 or FireWire port!
- Allows 2½" ATA hard drives (up to 12.5mm height) to be connected to your computers USB 2.0 or FireWire port
- Supports up to 200GByte hard drives
- Hot-swappable connection
- External interface: USB 2.0 (Type mini-B Female) & FireWire (6 Pin FireWire Female)
- Internal interface: ATA (44 Way IDC Female)
- USB 2.0 interface is also backwards compatible with USB 1.1
- FireWire interface is IEEE 1394/1394a and iLink compatible
- Stylish silver aluminium housing
- Compact lightweight design - 84 x 20 x 137mm (WxDxH), 110g
- Transparent USB 2.0 cable included (Type A USB Male to Type B USB Male), 1m
- Transparent FireWire cable included (6 Pin FireWire Male to 6 Pin FireWire Male), 1m
- Powered from USB port and/or PS/2 keyboard port (depending on hard drive power consumption) or 6 Pin FireWire port or optional power adaptor (Part No. 70229)
- Chipset: Genesys
- Compatible with Windows 98/ME/2000/XP and OS 9.0 to 9.2 & 10 (Mac OS 10.1 or later required for USB 2.0 support)
A handy carry case is available for this drive housing, please click here for details...
Please note: You can only make one connection from your computer to the housing via USB or FireWire. You can not connect to both the USB and FireWire ports on the housing at the same time!
Please click here for a guide on how to install a hard drive.
To use USB housings under DOS please refer to http://www.bootdisk.com/usb.htm
Please note that LINDY is not responsible for any software and information from this link and does not support this software.
|