Install your drive caddy into an external enclosure!

• For use with any 5¼” IDE removable drive modules or 5¼” IDE drives (CD, DVD etc.) with a maximum mounting depth of 227mm (up to 15mm longer drives or modules can also be used but they may protrude slightly from the housing)
• Can be connected to your computers USB 2.0 or SATA interface
• Supports CD and DVD writers; when using DVD writers in SATA mode supports up to 8x drives only
• SATA 1.0a to IDE compliant interface, Micron chipset
• USB 2.0 to IDE compliant interface, Cypress chipset
• Internal connectors: 1 x 40 Way IDC Male, 1 x 5¼” Power Male
• External connectors: 1 x SATA Female (not eSATA), 1 x USB Type B Female, 1 x 5 Pin Mini DIN for power supply
• Power Supply included
• Dimensions: 170 x 290 x 56mm (WxDxH)

Please note: You can only make one connection from your computer to the housing via USB or SATA. You can not connect to both the USB and SATA ports on the housing at the same time!

Picture for illustration only. Drive caddy not included, click here to see our range.